The new PoolLab 1.0 is a triple wavelength photometer for professional analysis of chemical reference levels in pool and spa water. Its six buttons give you immediate access to pre-installed parameters, namely: pH, Chlorine (free/combined/total), Alkalinity, Cyanuric Acid, Active Oxygen, Bromine, Chlorine Dioxide, Ozone, Hydrogen Peroxide, Total Hardness and calcium hardness..
As PoolLab 1.0 uses Bluetooth technology, it can be easily connected to free software/application for managing test results. After synchronizing the results, the software will be able to make dosage recommendations based on the disinfectant values entered..
The kit includes:
• The PoolLab 1.0 photometer
• 3 x AAA batteries Plastic stirring stickr
• 20 DPD No. 1 tablets (free chlorine)
• 10 DPD No. 3 tablets (combined/total chlorine)
• 20 Phenol Red (pH) tablets
• 20 Alkalinity-M (alkalinity) lozenges
• 10 CYA-Test tablets (Cyanuric Acid/Stabilizer)
• printed manual
PARAMETERS |
MEASUREMENT |
REAGENT |
pH |
6.5 - 8.4 |
Phenol Red Photometer |
Chlorine (free/combined/total) |
0 - 6 mg/L (ppm) |
DPD No. 1 photometer
DPD No.3 photometer
|
alkalinity |
0 - 200 mg/L (ppm) |
Alkalinity-M Photometer |
cyanuric acid |
0 - 160 mg/L (ppm) |
CYA-Test Photometer |
Active oxygen* |
0 - 30 mg/L (ppm) |
DPD No.4 photometer* |
bromine**
|
0 - 13.5 mg/L (ppm)
|
DPD No. 1 photometer
Glycine*
|
Chlorine dioxide**
|
0 - 11.4 mg/L |
DPD No. 1 photometer
Glycine*
|
ozone** |
0 - 4 mg/L |
DPD No. 1 photometer
DPD No.3 photometer
|
LR* hydrogen peroxide |
0 - 2.9 mg/L (ppm) |
Hyd. Peroxide LR photometer* |
Hydrogen Peroxide HR*
|
0 - 200 mg/L (ppm) |
Acidifying PT photometer*
Hyd. Peroxide HR photometer*
|
total hardness |
0 - 500 mg/L (ppm) |
POL20TH1*
POL20TH2*
|
calcium hardness |
0 - 500 mg/L (ppm) |
POL20CaH1*
POL20CaH2*
|
*Pads not included in the kit
**Requires Glycine tablets in the presence of chlorine